JUMBO REED (Hardened and Tempered High Carbon Steel)
The features and functions of JUMBO REEDS for Forming Fabric
-
Precise spacing of Reed Dents according to customer specifications.
-
Use of carefully selected Reed Dents firmly secured with a special epoxy resin.
-
Marking on Dent Steel at regular intervals according to customer requirements.
Materials of Dents
Stamped Dents
(Hardened and Tempered High Carbon Steel)
-
Quality of fabric is enhanced due to reduced frictional resistance to the warp.
-
Lateral surface roughness is reduced which partially contributes to the reduction in resistance to the warp.
-
The rounded cross-sectional shape of the stamped dents further contributes to this reduction in warp resistance.
-
Smooth surfaces and round edges also reduce the incidence of broken filament.
-
We guarantee that the reed will withstand maximum clamp pressures of 20-25 Nm.
Specification
Total length : Max. 15,340mm
Overall height : Max. 250mm
Reed density : Max. 40/cm
Width of dent : 12mm
Frame : Hard Type Alminum Channel
F(Width) X H(Height)
* 19mmX20mm
* 19mmX25mm
